LC02-F-4-PIR-01 12V4A PIR PV LED light Controller

Specification

Description
Specifically designed for PV/ Solar LED lights over LiFePO4 battery.
Consisting of Voltage Balance and voltage protection unit for battery, ensuring longer battery cycle life times.
Outstanding LiFePO4 battery BMS inbuilt, thereby a LiFePO4 PCM can be dispensed with.
With Day/Night Self-Recognition switch by solar voltage and a built-in timer, whichever is first as the switch to light off.
LC01-F-X-PIR-01 can convey PWM signals (5~10V,500HZ), working with the dimming function of the LED Driver which receives PWM signals, while LC01b-F-X-PIR01 directly operates PWM function from the load terminal to the Linear LED driver without PWM design.
Whichever you choose, your LED lamp shall have a PIR motion sensor connecting with it
The Capacitor-Pulse circuitry forming a C-MPPTankTM, hooks up with our innovative charging mode of CCP/CVP, enhancing efficiency in transplacing energy from solar cells to storage battery.

 

Feature
Solar LED lighting controller over LiFePO4 battery :
This is a genuine solar power charge controller over LiFePO4 battery, building up an effective, and practical solar power supply system, specifically constructed for LED street lights.
Smart MCU drives the system to operate:
A microcontroller coordinates operations of the system, driving overload protection, over-charge /over-discharge protection and low voltage protection, and load short-circui
Easy-to-read LEDs indicate the status of the system, including solar input power, charging, discharging, battery storage, or low battery.
Protection against in-rush current from such as thunderbolts via ceramic surge arrester.
Reverse polarity connection protection (self-reconnection after removal of condition)
A perfect integration, crowned with CCP/CVP charging mode, attaining higher efficiency
The integration frame of LiFePO4 battery BMS, and C-MPPTankTM helps the system operate in efficiency and with high cost-performance value, bring the system more reliability in its service life and attain an intelligent management on energy transferring from charging, discharging, energy-storing, and protections, and execute real time monitoring on the system.

 PIR Motion Sensing Control Function
LC02-F-4-PIR-01// LC02b-F-4-PIR-01  for LED lighting system to dim

ITEM 12- Hour Lighting Time Span
On/Off: by Day/Night Self-recognition Switch or Time-out, whichever first
Lighting Mode Full brightness for 10 minutes by % of load Normal Brightness without human body motion by % of load Full brightness With Human motion sensing via Motion Startup by % of load Normal Brightness without human body motion by % of load
   100      25    100     25

* LC02-F-4-PIR-01 for PWM LED Dimming Driver
* LC02b-F-4-PIR-01 for Linear LED Driver (none switch type)

LC02-F-4-PIR-01 //LC02b-F-4-PIR-01 12V/4A
Key Specifications and Electrical Parameter

 

Item  Key Parameter  Conditions  Unit
Rated Voltage for System  12    V
Max Input Voltage (Abs. Max Voltage)
(PV panel for 12V system advised)
 30 (65Voc)  Imp≦4A  Vmp
Battery Nominal Voltage 12V     V
C-MPPTank Design (Max Efficiency>)   Yes(90)    (%)
Battery Voltage Range( for LiFePO4 Battery)  9.6~15.40    V
Day/ Night Self-Recognition Switch     Yes  
Max Input Current  4    A
Reverse Charge Blocking Protection    Yes  
LFP Battery BMS/PCM built-in     Yes  
Self-wake-up from LVD. Capability     Yes  
Capability of Cell Balance   200    mA
Low Battery Warning by Green LED     Blinking  
Max Continuous Output Current   4    A
Overload Current Protection >   5±1%  150 mS  A
Current Consumption Without Load ≦   15   mA 
Current Drain in Low Voltage Protection  <0.5    uA
Protections: Over-charge, Over-heat, Under-Voltage, Reverse Connection     Yes  
Short Circuit Protection (PPTC) >   6  150mS  A
Charging Limits Voltage 14.6 3.65X4 V
Cell Balance Voltage 3.60 Single cell  
Boost Voltage 3.0 Single cell  
Float voltage 3.35 Single cell  
Boost Charging Reconnect <3.35 Single cell  
Low Voltage Reconnect 3.0 Single cell  
Under Voltage Warning 2.8 Single cell  
Discharging Limit Voltage 2.0 Single cell  
Over-charge Cutoff Voltage (Protection)   15.40  (3.85x4)  V
LVD Cutoff Voltage (Protection)   9.60  (2.40X4)  V
Working temperature   -30℃——+75℃    ℃
Ambient Temperature   -30℃——+60℃    ℃
Over- Temperature Protection  NTC 10KΩ   -20℃——+75℃    ℃
LED Indicators Orange Lit  Inputting  solar  
Red Lit / Blinking Full/Charging battery
Green Lit / Blinking Workable/Low load
Wire Gauge  17   AWG 
Anti-corrosion moisture enclosure: Indoor Use    Yes  
Energy-saving PWM signal to LED DRIVER  5~10//500  LC01-F-X  V/Hz
* Energy-saving PWM Duty Cycle by controller
* Only for Linear LED  Driver W/O PWM function
 50 (Customized)  LC02b-F-X

 

Back

Related Products