| Features | |||||
| 1. 100 Watts Output Power ( PWM Design ) 2. Wide Input Voltage Range 5~30VDC 3. Current Mode Control 4. On/Off control 5. Over Loading Protection 6. Output Over Voltage Protection 7. Input Over Voltage Protection 8. Continuous Short Circuit Protection 9. High Efficiency up to 92% 10. Soft starting and Power-Good detection 11. 12V (Customized) 12. Remote Control |
|||||
| 1. Electric Characteristics | |||||
| Item | Condition | Min | Typical | Max | Unit |
| Input Voltage | 5V to 30V | 5 | 30 | V | |
| Short-Circuit Protection |
Continuous, Automatic recovery |
Yes | |||
| Input Over Voltage Protection | Input Over Voltage for 5V to 32V | 30 | 32 | V | |
| Output Voltage, | VIN=5-30V, IOUT= 0A to4A | 24 ±2% | V | ||
| Maximum Output Current, IOUT Maximum Output 120W
|
VIN = 16-30V, VOUT = 24V | 4 | A | ||
| Typical Efficiency | VIN = 28V, VOUT =24V, IOUT = 4A | 92% | % | ||
| Switching Frequency | Fixed | 200 | KHz | ||
| Ripple & Noise | @ 20MHZ BW VOUT=24V,IOUT=4A | 100mVp-p | V | ||
| 2. Key Specifications | |||||
| 1. Output Power: |
100W | ||||
| 2. Input Voltage |
5~30 DC V | ||||
| 3. Input Current |
14A (Max) |
||||
| 4. Output Voltage(Customized) |
24V ( Customized) | ||||
| 6. Over current Protection: |
Yes | ||||
| 7. Over Charge Protection | Yes | ||||
| 8. Short Circuit Protection |
|||||
| 9. Ripple & Noise: | @ 20MHZ BW Vout=24V,Iout=4A 100mVp-p Max | ||||
| 10.Remote Control |
Yes (Option) | ||||
| 11.Working Status Display |
Yes (Option) | ||||
| 3.General Specifications | |||||
| 1. Efficiency | 92% typical | ||||
| 2.Hold-Up Time | 1ms | ||||
| 3. Switching Frequency | Fixed 200KHz | ||||
| 4 Dimension | 81mm x 70mm×15mm | ||||
| 5 Weight | 38.5g | ||||
| 4. Ambient Request | |||||
| 1. Operating Temperature | －40℃ ~ 60℃ | ||||
| 2. Storage Temperature |
-40°c to +85°c | ||||
| 3.Relative Humidity | 5% to 95% RH | ||||
| 4 Cooling Mode |
Natural Cooling ( No heat sink) | ||||
| 5 Operating Height |
10,000 Feet max. | ||||
| 6. Vibration Standard： |
5 ~ 500Hz, 2.4G rms | ||||